How to Repair MF Battery or Dry Accumulator After Dead for Motorcycle

AutoRepairToday. - When you sing Maintenance Free (MF) Battery in your motorcycle or car, sometime you will experience that the battery is suddenly dead. So, one way when you find this condition, you should replace this MF battery.

Dry Accumulator or MF Battery (Source: Screenshot of Trafoz) 

Don't be hurry because you can repair this MF battery after it dead. So, in here we will give you some steps that we get from one site this is Trafoz.

Before you want repair MF battery or dry accumulator, please so first prepare some materials and tools for equipment as follow.

1. Battery water . Make sure you buy the right that is water that is normally used to charge a new battery, not the battery liquid water enhancer.
2. Screwdriver (-) that allows it to be used as an opening cover the top of the dry battery.
3. Printer ink injections or syringes to insert battery water into the battery box.
4. Prepare a rag just in case if there is liquid drips or spills.

Step-by-Step on how to repair MF Battery

1. First, prepare the dry battery to be repaired and cleaned first try of dirt dust on the body of the battery using warm water so that the dirt can be easily detached.
2. Opens the top cover with a flat-head screwdriver by force but must be careful not to get parts that are torn or ruptured. Normally closed stick strongly because of the plant already in glue to prevent leakage.
3. Once open, you'll find a small rubber cap round usually there are 3 close to the small size of the battery and can be more to the size of the battery with large ampere.
4. Prepare battery water into the injection and you can begin to enter the liquid battery water on any existing holes carefully with a maximum size of 1 cm below the hole should not be too full.
5. Cover the hole and make sure it is tightly lest closed with no indication of a leak.
6. Position the cover body in its original position until it looks neat and tight. If the due process that had been forcibly opening has provoked a concession, you can give him a plastic glue (glue gun) to help reattach perfectly.
7. Dry battery is ready to do CHARGER for charging voltage by connecting on a motorcycle or a car that could've lit (JUMPER) so that the new battery is getting voltage inject repaired early as starter. There is another option that is by using a transformer charging (Charger Transformer) for charging a faster start.
8. You can check if the battery already has a charge voltage, if it is, you can directly replace the cars and motorcycles are in want and then do the starter to start the engine. If the machine has been successfully put on, so that is left in the position of stationary (idle rotation) until at least 15 minutes to adjust to fill the battery with a stable voltage.

Step by step repairing MF Battery after dead (Source: screenshot of Trafoz)

Source:

• http://www.trafoz.com/memperbaiki-aki-kering/

Thank you for your coming here in Auto Repair Tips, we hope the article above will help you to know more about your automotive information like tips and trick, auto news, modification, auto repair software, etc. Please comment here when you want to share and other. Thank you.